MODEL EAGLE108

MODEL EAGLE108

GENERAL DESCRIPTION

Model EAGLE108 – Drone Detection & Jamming System

1. The emanating threat of drones
In recent years the threat of drones has become increasingly vivid to many security agencies. Drones, nowadays, are used by terrorist and criminals for a multitude and variety of activities such as dropping small bombs on enemy forces in Syria and Iraq, and the same drones are often used for reconnaissance and smuggling of illicit contrabands to prisons.

2. The solution – concept and method of operations
Phantom Technologies has developed and created in the last couple of years a technological response to this type of threat. Phantom’s concept of operations relies on early detection of the drone threat by scanning the sky looking for hostile drones.
The method of operations is based on four basic elements:
a. Scanning the area of interest for drones
b. Detect – the signal of the drone
c. Jamming the drone signal to the operator

3. Solution description
The EAGLE108 Tactical drone Jammer was designed to neutralize the flight unauthorized Drones/Quadcopters by jamming their downlink signal. The EAGLE108 has unique software which allows quickly detecting the drone and jamming the hostile drone from ranges of up to 4km (with special dedicated antennas). The below provides technical description of the system.

3.2 System basic functionalities include the following:

a) Jamming of Wi Fi frequencies 2.4 and 5.8GHz.
b) Jamming of the GPS frequency 1.5GHz.
c) Scan – detect – identify – jam up to 1km.
d) All the above is in fixed installation
e) Additional detection and jamming bands can be added upon demand

3. 3 System’s Modes of operation:

Basically, the drone jammer creates an envelope of jamming which surrounds the drone. Concretely, the system jams the downlink signal of the drone to the drone operator and the signal coming from the GPS satellite. Jamming time has been set up to 2 minutes in order to avoid any possible interference to other RF relevant emissions. The following explains the various methods of system operations:
a) Manual operation.
b) Automatic detection and jamming
c) Detection only.

3. 4 System deployment options:

a) Fixed installation
b) Vehicle installation
c) Naval Installation

TECHNICAL SPECIFICATIONS JAMMING BLOCK

RF Characteristics

Output Power 375W
Internal Modulation FM Hopping Frequency & White Noise
Signal Source DDS & PLL synthesized
Power Supply 28VDC
Modules Per Unit Up to 7 modules
Remote Control TCP/IP Protocol
Antenna External Omni-Directional & Directional Antenna

Possible Jamming Frequency Bands

Frequency Band The below represents 7 different bands that are available for installation in the system. Final configuration of the system will be decided with the customer.
27-72 MHz
400-470 MHz
900-1,200 MHz
1,150-1,350 MHz
1,350-1,650 MHz
2,400-2,483 MHz
5,000-5,900 MHz
Air Interface Standards Digital: ISM, GPS, Video & W-LAN

Physical Data

Dimensions 3 x 19″/4U – Total 19″ x 12U
Weight Approx. 60Kg

Environment of operation

Operating Temp -20ºC – +65ºC
Humidity 95%
Mil Spec Standard MIL- STD- 810F

DIGITAL RECEIVER BLOCK

RF Characteristics

Frequency Range 20-6,000 MHz
DATA Format 2 x 16 Bits
Instantaneous Bandwidth 400MHz
Squelch Can be set between -120dBm to -30dBm
Gain Control 80 dB
DATA Format 2 x 16 Bits

Inputs/Outputs

Scan Characteristics Scan Characteristics
DATA Interface LAN/

Environment of operation

Operating Temp -30 – +65°C
Humidity 5 – 95%
Storage Temp. -40°C – +70°C

Power

Operating Voltage, Current 12V, 2A

*Specifications are subject to change without prior notice
Ver. 1.00.03.17