CCJ800PL Cellular GSM Jammer (15W Output Power/Band)

CCJ800PL Cellular GSM Jammer (15W Output Power/Band)


MODEL CCJ800PL – 15W Output Power/Band

The CCJ800PL was designed for blocking GSM cellular networks and all other cellular, satellite and WiFi standards in the world. The CCJ800PL use state-of-the-art technology for maximum performance.

The unit is controlled by a Microprocessor for PLL programming. CCJ800PL transmits a noise signal which cuts off all cellular communication between the mobile phones and the cellular cells. The jamming radius depends on the signal strength in the given area.

All cellular mobile handsets in the vicinity of the CCJ800PLwill be totally BLOCKED and will not be able to receive or dial outgoing calls.

When the CCJ800PL affects a mobile phone, the display will show “NO SERVICE”.
The CCJ800PL can be installed for remote control and monitoring via an Ethernet network.

Cellular Jammer


RF Characteristics

Output Power per band15W per band
Internal ModulationFM Hopping frequency
Signal SourcePLL synthesized
Modules Per UnitUp to 7 bands

Jamming Frequency Range

Frequency BandAll cellular and Wi Fi bands
Air Interface StandardsDigital: IDEN, TDMA, CDMA, GSM, UMTS, LTE
Satellite: Thuraya, Inmarsat, Iridium

Physical Data

DimensionsPelican 1650
544 x 419 x 200 mm
WeightApprox. 35Kg

Environment of operation

Operating Temp-20ºC – +65ºC
Humidity5% – 80%

Internal Batteries

Capacity25.9VDC / 30 AH
DurationMin. 1 Hour with 6 bands

*Specifications are subject to change without prior notice

    Whatsapp Us