GENERAL DESCRIPTION
MODEL WLJ100 – 500m/W output power per band
The unit has been designed to block WiFi signals in an area surrounding the jammer, and is controlled by a Microprocessor for PLL & DDS programming.
The WLJ100D transmits a narrow band white noise signal which cuts off predefined WiFi channels & Bluetooth communications. The WLJ100D jammer can be programmed by the user to jam any number of discrete frequencies with in the RF coverage of the jammer.
All WLJ100D parameters are controlled remotely via an SNMP terminal such as RF output power and jammed frequencies. This function utilizes the presence of the DDS technology within the wifi jammer. The jamming range is up to 20 meters from the jammer.
The WLJ100D can be optionally supplied with high quality Lithium-Polymer Batteries that provide 2 hours of continuous operation.
TECHNICAL SPECIFICATIONS
RF Characteristics
| Output Power | 500 m/W per band 27 dBm – 1dB steps – 10 levels |
| Internal Modulation | FM Hopping frequency |
| Signal Source | PLL synthesized & DDS |
| Power Supply | 12VDC Option – Li-Polymer Rechargeable Battery |
| Modules Per Unit | 1 or two (client defined) |
| Remote Control | Via SNMP Controlled parameters: RF output level Jammed frequencies |
| Antenna | External Omni-Directional / Directional |
Jamming Frequency Range
| Frequency Band |
2,400-2,483 MHz 5,150 – 5,185 MHz |
| Air Interface Standards | WiFi & Bluetooth |
Physical Data
| Dimensions | 250mm x 150mm x 38mm |
| Weight | Approx. 0.8Kg |
Environment of operation
| Operating Temp | -20ºC – +65ºC |
| Humidity | 5% – 80% |
*Specifications are subject to change without prior notice
